Unique design with built-in relay
This cable enables your Yaesu radio to control the
transmit/receive switching of your linear amplifier. Essential if your
linear doesn't have RF sensed switching. Even with amplifiers with RF
switching, it eliminates the need for switching delays that often mean
missing the first part of the other station's transmission - irritating
at best, but disastrous while contesting or working fast CW!
A state-of-the-art opto-isolated solid state relay is incorporated in the DIN connector which gives complete electrical isolation between the radio and amplifier, while providing up to 500mA switching capability at 48V DC or AC with only 10mA drawn from the radio.
One end of the cable has a Phono/RCA plug which connects to the Key, Tx or PTT input connector of the linear amplifier. The other end of the cable has an 10-pin mini-DIN plug which connects to the radio's LINEAR socket. This cable is wired to suit amplifiers that require a closure to ground to switch them to transmit.
Also perfect for switching the MFJ-1025 and MFJ-1026 noise cancellers and many transverters and Tx/Rx antenna switchers that require a low current/voltage DC closure to ground.
Although we are happy to offer advice, it is ultimately
your responsibility to verify that the switching output of your
transceiver and the switching input of your amplifier can be safely
connected to each other using this cable.
The radio, cable or linear can be damaged by connecting incorrectly. Please check carefully by consulting the manual for your linear amplifier and make sure that you will not exceed the absolute maximum ratings of the relay:
- Switching voltage 60V DC/AC
- Continuous load current 500mA
- Isolation 2.5kV for 1 min
10 pin linear amp switching cable with relay for Yaesu FT-450 FT-950 FTdx1200 FTdx10
- Brand: TechnoFix
- Product Code: LinRla10pYsu
- Availability: In Stock
Prices include UK VAT. Customers outside UK - you may be charged additional tax and/or import duties by your country's authorities.