High quality screened (shielded) cable. Length approx 1.5m/4ft 10ins.

This cable enables your Icom radio to control your Acom 'S' series linear amplifier. The cable assembly has a DE15 male plug which connects to the Acom's CAT/AUX socket and a 13 pin DIN plug to connect to the transceiver's ACC socket.

For use with Acom 'S' series amplifiers, for example:

• Acom 500S
• Acom 600S
  
• Acom 700S
• Acom 1200S
• Acom 2020S

The following functions are available with this cable:

• PTT - The amplifier switches to transmit and back to receive at the same time as the transceiver.
• Band - The amplifier is able to determine the amateur that the transceiver is tuned to. It then automatically switches to the correct band.
• Remote on/off - Switching on the transceiver also switches on the amplifier ready for use. Likewise, switching off the transceiver powers down the amplifier.
  

For a more in-depth description of these functions and instructions on how to set up the amplifier for your transceiver correctly, please consult your amplifier's manual.

This cable uses Band control. A CI-V control version is also available. For more information please visit our Cat v Band control information page.

Band control cables (either BCD or Voltage) must not be used if ACOM 04AT remote automatic antenna tuner and switch is a part of the system. Please purchase the CI-V version.

Disconnect any existing PTT cable before connecting this cable - it is not necessary and will cause incorrect operation.