High quality screened (shielded) cable. Length approx 1.5m/4ft 10ins.

This cable enables your Icom radio to control your SDR switch.

One end of the cable has a 3.5mm jack plug which connects to the PTT input connector of the SDR switch. The other end of the cable has an 7 pin DIN plug which connects to the radio's ACC(2) socket. Perfect for switching the commonly available SDR Tx/Rx antenna and audio switches that require a low current/voltage DC closure to ground.

The Icom IC-706 MkII, MkIIG, IC-700, IC-7100 have dual switching outputs, one for HF and another for VHF/UHF. This cable uses the HF output ONLY.

Please check carefully by consulting the manuals for both your radio and your SDR switch and ensure the keying output of your radio and the switching input of your SDR switch are compatible before purchasing this cable. The radio or SDR switch can be damaged by connecting incorrectly.

Although we are happy to offer advice, it is ultimately your responsibility to verify that the switching output of your transceiver and the switching input of your SDR switch can be safely connected to each other using this cable.