Unique design with built-in relay
This cable enables your Yaesu radio to control the
transmit/receive switching of your linear amplifier. Essential if your
linear doesn't have RF sensed switching. Even with amplifiers with RF
switching, it eliminates the need for switching delays that often mean
missing the first part of the other station's transmission - irritating
at best, but disastrous while contesting or working fast CW!
A state-of-the-art opto-isolated solid state relay is incorporated in the DIN connector which gives complete electrical isolation between the radio and amplifier, while providing up to 500mA switching capability at 48V DC or AC with only 10mA drawn from the radio.
One end of the cable has a Phono/RCA plug which connects to the Key, Tx or PTT input connector of the linear amplifier. The other end of the cable has an 8-pin mini-DIN plug which connects to the radio according to the following list:
FT-450 TUNER connector
FT-950 TUNER connector
FT-847 TUNER connector
FT-817 ACC connector
FT-857 CAT/Linear connector
FT-891 TUN/LIN connector
FT-897 CAT/Linear connector
FT-840 BAND DATA connector
FT-991 TUN/LIN connector
The FT-847 TUNER connector keying output used by this cable is only active on HF.
For other bands, the FT-847 also has 5 pin mini-DIN SBY connector with
individual linear keying outputs available for HF, 50MHz, 144MHz and
430MHz. We sell a quad-band pigtail cable for the FT-847 SBY output.
The FT-450 and FT-950 also have a 10 pin LINEAR connector and we have suitable cables.
Also perfect for switching the MFJ-1025 and MFJ-1026 noise cancellers and many transverters and Tx/Rx antenna switchers that require a low current/voltage DC closure to ground.
Although we are happy to offer advice, it is ultimately
your responsibility to verify that the switching output of your
transceiver and the switching input of your amplifier can be safely
connected to each other using this cable.
The radio, cable or linear can be damaged by connecting incorrectly. Please check carefully by consulting the manual for your linear amplifier and make sure that you will not exceed the absolute maximum ratings of the relay:
- Switching voltage 60V DC/AC
- Continuous load current 500mA
- Isolation 2.5kV for 1 min
8 pin linear amp switching cable with relay for Yaesu FT-817 FT-857 FT-897 FT-991
- Brand: TechnoFix
- Product Code: LinRla8pYsu
- Availability: In Stock
Prices include UK VAT. Customers outside UK - you may be charged additional tax and/or import duties by your country's authorities.